Machine Plates

Keep your metal dies secure and in place with the Gemini ll Magnetic Shim from Crafter’s Companion.This papercraft tool is ideal when using a variety of different dies at the same time. With its innovative magnetic coating, each metal die can be accurately aligned on the shim separately and with just one pass through your Gemini ll machine, you can create multiple designs in one go. ?      Printed with both metric and imperial measurements?      Measures 9” x 12.5”?      Cut multiple designs without the worry of your metal dies colliding?      To get the best from your Magnetic Shim, ensure you rotate and flip it after each pass through your machine.

The Gemini ll Metal Cutting Plates from Crafter’s Companion are a die-cutting essential.Adding an extra layer to your existing die-cutting combination is vital when it comes to cutting smaller, more detailed designs as it adds a higher pressure, making sure every last intricate detail is cut to perfection and simply pops out from your chosen material after just one pass through your Gemini ll Machine.Each metal plate is sized to work with your Gemini ll Die Cutting and Embossing Machine and offers edge-to-edge die cutting on up to A4-sized materials. ?      Cuts the most intricate designs from multiple layers of fabric?      Designed to add a higher pressure to your existing die-cutting combination?      For easy use, follow the User Guide included with your Gemini ll?      To care for your metal plates, ensure you flip and rotate them after each pass through your machine  

Clear Cutting Plate for the Gemini This is a consumable item and it is subject to wear and tear Pack contains one plate This clear cutting plate for the Gemini is a consumable item and is subject to wear and tear. To care for your plates, please flip and rotate after each pass. If the plate does start to bow, flip over and pass through until it is flat again, then continue to flip and rotate as normal.

This pair of Cutting Pads was specially designed for use in the Big Shot Plus Machine. Constructed of high-quality polycarbonate plastic, these see-through Cutting Pads allow for easy die-cutting of Sizzix steel-rule dies (Bigz Plus) in the Big Shot Plus machine. Simply sandwich the die and material to be cut between the Cutting Pads and roll through the machine. A Premium Crease Pad may be needed in place of one Cutting Pad when die-cutting Sizzix steel-rule dies containing crease rule.

Keeping your metal dies secured every time! See your metal dies cut with ease and without movement with the Gemini Magnetic Shim from Crafter's Companion. With enough magnetic power to prevent any movement whilst passing through your Gemini Die Cutting and Embossing Machine, the Gemini Magnetic Shim is absolutely perfect for cutting those small and intricate designs. ?             Use multiple metal dies at once - As the shim is magnetic, it keeps your dies in place as they roll through the machine. This means that you can use multiple dies at once without the worry of them colliding with each other. ?             Perfect cuts every time - Simply pop the Magnetic Shim between your clear cutting plates as another protective layer and cut precisely and perfectly every time. The addition of the shim makes the die cutting sandwich thicker and helps to provide an even more accurate cut from your dies, particularly if they are intricate or thin. ?             Dimensions - 226mm x 317.5mm (9” x 12.5”) Care instructions: To care for your Gemini Magnetic Shim, please flip and rotate it after each pass through your Gemini Die Cutting and Embossing Machine. If the Magnetic Shim does start to bow, flip it over and pass through until it is flat again, then continue to flip and rotate as normal.

Designed for use with the Sizzix Big Shot Machine, Vagabond and BIGkick machines. Use to sandwich the die and material for cutting and embossing. See-through Cutting Pads allow for easy die-cutting of thicker and longer dies. Both sides of the cutting pad should be used. Constructed of high-quality polycarbonate plastic. Specially designed for use in the BIGkick, Big Shot Machine and Vagabond machines. Constructed of high-quality polycarbonate plastic, these see-through Cutting Pads allow for easy die-cutting of thicker, longer Sizzix steel-rule dies Box Contains 2 x Sizzix Extended Cutting Pads

Plastic folders for dies and embossing folders Each folder measures 6" x 9" (15cm x 23cm) Designed to be used alongside the Gemini Midi manual die-cutting machine

Plastic Shim for the Gemini Go This is a consumable item and it is subject to wear and tear Pack contains one plate   This plastic shim for the Gemini Go is a consumable item and is subject to wear and tear. To care for your plates, please flip and rotate after each pass.  If the plate does start to bow, flip over and pass through until it is flat again, then continue to flip and rotate as normal.

Purple Cutting Plate for the Gemini Go This is a consumable item and it is subject to wear and tear Pack contains one plate   This purple cutting plate for the Gemini Go is a consumable item and is subject to wear and tear. To care for your plates, please flip and rotate after each pass.  If the plate does start to bow, flip over and pass through until it is flat again, then continue to flip and rotate as normal.

Gemini Junior - Cutting Plates for Fabric  2pcs (Metal cutting plate A, and metal cutting plate B - each plate is slightly different in thickness) Instructions included  Size of plates: 5.8”x8.7” (147mm x 221mm) Our Multi Media Dies are capable of cutting through multiple layers of fabric for a variety of projects. These dies are designed and manufactured deeper than traditional thin metal dies. When using Multi Media Dies to cut multiple layers of fabric, we recommend that you use these Cutting Plates for Fabric.  When you start to use these Cutting Plates for Fabric, we suggest you use them with a new set of Clear Cutting Plates; ideally dedicating a set of Clear Cutting Plates for use with the Cutting Plates for Fabric to achieve the best results.

Rubber Embossing Mat for the Gemini Junior This is a consumable item and it is subject to wear and tear Pack contains one plate   This Rubber Embossing Mat for the Gemini Junior is a consumable item and is subject to wear and tear.

1 storage bag for the Gemini Mini manual machine A storage bag for our Gemini Mini manual machine. The perfect size to transport and store your Gemini Mini, making it even easier to take to classes and workshops. Featuring a zip fastening and a carry handle on the top.

SPELLBINDERS Grand Calibur Raspberry Spacer Plate. This package contains one 8.5x12 inch Raspberry Spacer Plate for use in the Spellbinders Grand Calibur die-cutting machine (machine sold separately).Create a sandwich for Spellbinders M-Bossabilities folders and other embossing folders using the A Base Plate, M-Bossabilities folder and Grand Raspberry Plate. Approximate Measurements: 8.5 x 12"Ideal for your handmade card making and scrapbooking projects.